1H20L (70A-300A) aR fast fuse/new energy fuse

Dongguan Gongfu Electronics Co., Ltd. specializes in the production of: high-speed fuses, bolt fuse holders, ANL fuses, bolt fuses, MEGA fuses, MEGA fuse holders, MIDI fuses, MIDI fuse holders, blade fuses, fuses, fuse holders, fuse clips, automotive fuses, automotive fuse holders, automotive fuse boxes, DC fuses, new energy fuses, energy storage fuses, photovoltaic fuses, panel fuse holders, current fuse holders, fuse boxes, 5×20 fuse holders, 6X30 fuse holders. 10×38 fuse holders, high and low voltage fuses, semiconductor fuses, fast-acting fuses, wiring harness fuse holders, PCB fuse holders, substrate fuse holders, rail fuse holders, DC fuse holders and other fuse accessories. Our products have obtained UL, cULus, Tuv, CE, CQC and other certifications. Our products comply with ROHS and REACH standards and provide one-stop solutions.

描述

1H20L (70A-300A) aR fast fuse / new energy fuse

                  1H20L Series DC(EV) fuse

1. Purpose and Use

This series of fuses are suitable for lines with rated DC voltage below 250V (125V), rated current of 70A-300A, and breaking capacity of 20kA.
They are widely used in semiconductor protection, mobile forklift, electric elevator, charger, power supply, on-board battery, on-board circuit system, and inverter integrated protection.
It has the characteristics of strong current limiting capacity, large breaking capacity, and fast short-circuit breaking speed.
Can withstand temperature shock, mechanical shock, current shock, and chemical load.
Performance refers to JASOD 622, and environmental reliability conforms to ISO 8820, JASOD 622, and GB/T31465.

2. Normal Working Conditions

Normal operating ambient temperature: -5℃ ~ 40℃
Allowable operating conditions: -40℃ ~ +125℃

3. Use Category

Full range fast fuse (gR)

4. Structural Characteristics

The melting tube is made of high-temperature ceramic with flame-retardant properties and high hardness.
The melt is a variable cross-section made of 99.99% pure silver and sealed inside the tube.
High-purity quartz sand and treated chemicals are used as arc extinguishing media.
Contact surfaces are silver-plated to ensure performance, reduce temperature rise, and lower power loss.
The melt is spot welded for enhanced safety and reliability.

5. Agreed Current and Agreed Time
Test Current (A) Fusing Time (s)
In: ≥60A
Min Max
1.1In 14400
1.35In 150 3600
1.5In 20 1500
2In 1 300
3In 0.2 30
5In 0.05 1

Note: The agreed current and agreed time required by the customer can be negotiated.
Fuse performance may vary based on environment and design conditions.
The above values are based on 25℃.

6. Main Parameters
No Product Model Rated Current (A) Rated Voltage & Drop Breaking Capacity (kA)
Rated DC Voltage (V) Max Voltage Drop (110%) (mV)
1 1H20L070 70 125V/150V 100 20
2 1H20L080 80 125V/150V 90 20
3 1H20L100 100 125V/150V 96 20
4 1H20L125 125 125V/150V 86 20
5 1H20L150 150 125V/150V 96 20
6 1H20L200 200 125V/150V 87 20
7 1H20L250 250 125V/150V 84 20
8 1H20L300 300 125V/150V 85 20

评价

目前还没有评价

成为第一个“1H20L (70A-300A) aR fast fuse/new energy fuse” 的评价者

您的邮箱地址不会被公开。 必填项已用 * 标注